Two people, one sink, and a morning routine that keeps colliding. That’s usually what starts the conversation. Someone wants a second sink so they can stop taking turns, and the assumption is that a double vanity just drops into the space where the old one sat. Sometimes it does. More often, the honest answer is that you need more wall than you think, and finding it means rethinking the whole bathroom rather than swapping one cabinet for a wider one.
We’re TMC Construction Services. I’ve been in this trade for about 27 years, and TMC itself has been remodeling around Cincinnati since March 2015. We started on bathrooms before we ever grew into kitchens and outdoor living. So when a homeowner in Loveland or Montgomery asks us whether they can fit a double vanity, we’re not guessing. We’re picturing the studs, the plumbing, and where that second drain has to run.
How much wall a double vanity actually needs
A double vanity only works when both people get a real station — enough room for two bowls, a little counter between them, and storage that doesn’t disappear under the plumbing. Catalogs sell a wide range of “double” cabinets, including narrow ones that put two bowls so close that elbows knock and there’s nowhere to set anything between the sinks. If your clear wall is tight, you’re usually better off with one generous single sink and more usable countertop than two cramped ones.
Measure the clear wall, not the room. Doors that swing in, toilet clearance, a shower door, a towel bar you actually use — all of that eats into the number. Exact inches vary by layout and code, so we confirm them on site in the walkthrough rather than guessing from a photo. In a lot of older primary baths on the east side, the wall that looks wide enough is already spoken for by a window or a linen closet. That’s the moment the project stops being a vanity swap and becomes a real remodel.
The double vanity inside a full bath rebuild
Here’s the part homeowners are often surprised by. Adding a second sink means adding a second set of supply lines and a second drain. Once a wall is open for that, we’re already into the framing, and if the wall’s open we might as well ask the better question: what do you actually want this bathroom to be?
One recent primary bath is the clearest example we can give. It was small, and the couple wanted room to move. We moved a wall to make the shower much larger, pulled out a freestanding Jacuzzi tub that nobody had used in years, and built the space back from the studs. New vanity, all-new tile throughout, new lighting, quartz countertops, a zero-degree entry shower, and all-new plumbing. It was a from-scratch rebuild, which is what most of our primary baths turn into once we start.
That’s the honest frame for a double vanity. On its own it’s a cabinet. Inside a rebuild, it’s one decision among many, and it’s usually cheaper per-dollar-of-improvement to make those decisions together than to come back in three years to move plumbing you could have handled the first time. When we plan a [vanity in a primary bathroom remodel](https://www.tmcconstructionservices.com/bathroom-remodeler/), we’re sizing the sinks against the shower, the toilet clearance, and the storage all at once — and you can always start from our [homepage](https://www.tmcconstructionservices.com/) if you want the bigger picture of how we work.
What are the drawbacks of a double vanity?
The real drawbacks are space and storage, not the sink count. Two bowls with their two P-traps eat the cabinet space directly under each sink, so the drawer bank you were counting on shrinks. You also lose the long uninterrupted counter that a single vanity gives you, which matters more than people expect when they’re doing hair or laying out toiletries. And in a narrow bath, forcing a double in can push the toilet or the door into an awkward spot.
So the trade-off is real: you gain a second station, you give up counter and under-sink storage. The way we handle it is with the cabinet layout. A center drawer stack between the two sinks recovers a lot of what the plumbing takes, and full-extension drawers on the outer runs keep the storage honest. We build with many cabinet manufacturers, Omega most often, and we’ll go full custom when a semi-custom box can’t fit the exact opening. That flexibility is what keeps a double from feeling like a compromise.
What is the standard size for a double vanity?
Most homeowners are happiest when each person gets a comfortable station plus a little counter between the bowls. Larger primary baths can go bigger when the wall allows, which opens the door to a tower cabinet in the middle for real storage. On a tight wall, we steer people toward a single. The number that matters isn’t the cabinet width in a catalog, it’s the clear wall you have to work with after doors, toilet, and shower are accounted for — and we’ll measure that with you on site.
Quartz countertops for a double vanity
Quartz is what most of our bath clients land on, and for a double vanity it earns its keep. It comes as one continuous slab across both sinks, so there’s no seam collecting toothpaste between the bowls, and it shrugs off the water, makeup, and daily wear a bathroom counter takes. We work with Cambria, Silestone, and Caesarstone. On the primary bath rebuild mentioned above, quartz countertops tied the whole room together and gave that long two-sink surface a single clean top with no maintenance headache down the road.
If you’re weighing quartz against natural stone, the short version is that quartz doesn’t need sealing and won’t etch from a spilled bottle of something acidic. That’s why it’s become the default request for us in the bath.
Are double vanities still in style?
Yes, and demand is steady because the reasons for them are practical, not trend-driven. Two working adults sharing a primary bath still want two sinks. What has shifted is how they’re built: cleaner cabinet lines, wall-hung or furniture-style bases, quartz tops, and better lighting per station. We’re also seeing more requests tied to aging-in-place. A homeowner planning to stay in the house long-term will pair a double vanity with wider clearances, a comfortable counter height, and a curbless shower, so the room works now and keeps working later. Many of our clients are near or past retirement and want exactly that. Aging-in-place bathroom features aren’t a separate product, they’re just smart choices we build into the bathroom.
What is the average cost of a double vanity?
The cabinet and top are a small piece of what a homeowner actually pays, because a double vanity almost never travels alone. In our work, a bathroom refresh runs $20,000 to $40,000, and a complete primary bath redo, which is where most double vanities live, typically lands between $50,000 and $70,000. The biggest cost drivers aren’t the vanity itself. They’re changing the footprint (moving walls and plumbing to make room for that second sink), heated floors, and a zero-degree entry shower. Tile and material selections move the number too.
We never hand anyone a napkin with a price scribbled on it. Before you sign anything, you see a 3D rendering of the finished bathroom, vanity and all, so you know exactly what you’re getting. We build allowances into the proposal so the cost stays predictable through the project instead of creeping up on you.
How we build it, start to finish
Most of a bathroom job is prep you never see. We protect and contain dust, strip to the studs, deal with any mold or mildew, and strengthen the shower floor and framing. Then waterproofing, concrete board (with a heated mat if you’re doing heated floors), tile, and only then do the cabinets go in, followed by electrical, exhaust, mirror, lighting, drywall, and paint. That’s a week to 10 days of prep before a single cabinet is set. It’s also why the finish holds up.
When we start on a Monday, we’re on your job Monday through Friday, 8:30 to 5, until it’s done, usually about four weeks. We’re not disappearing to run five other jobs, and we’re not waiting on materials because we selected everything with you months earlier. Kitchens and baths are 100% in-house here, our own crews, not a rotating cast of subs. And the comment we hear most from clients is that we leave the house cleaner than we found it, because we vacuum and dust at the end of every day.
Where we work
We’re based in Loveland and do most of our bath work across the eastern corridor, Montgomery, Mason, Madeira, Hyde Park, Indian Hill, and the towns up I-71 and above I-275 on the east side. We’ll travel out toward West Chester, Mount Lookout, and Bethel when the project’s right. TMC has been at this since March 2015. We’re insured and bonded with a $2 million liability policy always in force, we back our labor with a one-year warranty, and we’ve been named Best of Houzz across multiple years.
See it before you build it
If you’re wondering whether your wall can carry a double vanity, the fastest way to a real answer is to have us measure it. The first in-person consultation is always free. We’ll look at the actual space, talk through what you want the room to do, and if we move forward you’ll see a 3D rendering of the finished bathroom before you commit to anything. Call TMC Construction Services at (513) 781-3000 or reach us at team@tmcbuild.com to set up a visit.

